pb nvidia.ko ou direction vers kernel

[slack88]

bonjour, j essaie depuis qq temps d installer les drivers nvidia mais il me dis que je n ai pas les source du kernel hors je les ai et meme en faisan un --kernel-source-patch=/usr/src/linux il me dis qu'il son installer or il ni son pas car lorsque je fait un mordprobe nvidia ril me can t locate modules donc si qqun peu m aider a installer ces drivers merci

[Patrick]

bonsoir,

De mémoire, installer "juste" les sources ne suffit pas.
Il faut aussi avoir fait un make menuconfig puis un make dep.
Vérifie si tu as aussi les headers kernel installé

A +

[paulin]

Bonjour,
J'ai aussi des problémes avec les drivers Nvidia.
Faut-il avoir le kernel-headers d'installé ? Je pensais que ça posait des problèmes par ailleurs.

Paulin.

[Titeuf]

Bonjour,

Bon, j'ai testé avec un kernel 2.6

1 - Avoir que les sources suffit pas. Faudrait donc qui ai été compilé au moins une fois.

2 - Je n'ai pas trouvé de trace d'un package kernel-header dans mon /var/log/packages.

Pour un kernel 2.4, j'en ai plus ici, donc je sais pas

Voilà

[paulin]

Bonjour,
Je me suis mal exprimé. J'entends par "kernel-headers" le fichier que l'on peut installer lorsqu'on veut compiler un nouveau noyau, du style --> kernel-headers-2.6.7-i386-1.tgz

Paulin.

[Patrick]

Salut,

J'ai foiré

C'est Titeuf qui a raison
Déja, avec un kernel 2.6 le make dep ne sert plus et on te le signale gentillement
Paulin :
Pour le fichier kernel-header-2.6.7, je l'ai pas non plus dans les packages installés. Comme quoi je ferais mieux d'y regarder à deux fois avant de dire des betises
Mais dans la mesure ou tu as un kernel complet et installé, je vois pas ou est ton probleme pour installer les drivers Nvidia.

Slack88:
Tu utilise quel kernel ?
Est-il recompilé ?

A +

[paulin]

Salut,
Je vais essayer de nouvau une installe et noter les messages. C'est vrai que c'est bizzare parce que sous mdk 10.0 c'est passé comme une lettre à la poste.

Paulin.

[paulin]

Salut,
Je viens de réinstaller le dernier pilote Nvidia et au final :
bash: glxgears: command not found
[1] 3245
[1] Exit 127 glxgears

et
bash: glxinfo: command not found


Voici les messages lors de l'installe, suite à la commande sh ./NV....run :

No precompiled kernel interface was found to match your kernel ; would you like the installer to attempt to download a kernel interface for your kernel from the nvidia ftp site (le site) ?

Que je réponde oui ou non avec une connexion établie, ça télécharge pas.

puis écran suivant :

No precompiled kernel interface was found to match your kernel ; this means that the installer will need to compile a new kernel interface

Je réponds ok, pas le choix

écran suivant :

WARNING : Your kernel was configured to include rivafb support as a loadable kernel module. The rivafb driver conflicts with the nvidia driver ; the nvidia kernel module will still be built and installed, but be aware that the nvidia driver will not be able to fonction properly if the rivafb module is loaded !

ok

Et l'installe se poursuit, puis fin.

lsmod donne ça :
Module Size Used by
ipt_MASQUERADE 2880 1
iptable_mangle 2176 0
iptable_nat 21612 2 ipt_MASQUERADE
ipt_state 1536 2
ip_conntrack 29448 3 ipt_MASQUERADE,iptable_nat,ipt_state
iptable_filter 2240 1
ip_tables 15808 5 ipt_MASQUERADE,iptable_mangle,iptable_nat,ipt_state,iptable_filter
ppp_synctty 7488 0
ppp_async 9664 1
ppp_generic 24788 6 ppp_synctty,ppp_async
slhc 6720 1 ppp_generic
appletalk 30324 2
ax25 52652 2
ipx 24684 2
ipv6 231328 10
ohci_hcd 18756 0
via_agp 6784 1
pciehp 94636 0
usb_storage 64320 0
shpchp 97516 0
uhci_hcd 29264 0
ehci_hcd 28036 0
snd_via82xx 24612 1
snd_ac97_codec 66372 1 snd_via82xx
gameport 3584 1 snd_via82xx
via_rhine 18888 0
mii 4032 1 via_rhine
crc32 3840 1 via_rhine
nvidia 3469596 0
ds 14084 0
yenta_socket 18240 0
pcmcia_core 54212 2 ds,yenta_socket
isofs 31288 1
zlib_inflate 21248 1 isofs
ext3 114152 1
jbd 53912 1 ext3
nls_utf8 1600 2
nls_cp437 5376 1
vfat 11840 1
evdev 7296 0
fat 40128 1 vfat
agpgart 27624 1 via_agp
psmouse 18440 0
reiserfs 351956 2

Il est évident que la soluce est dans les premiers messages, mais là je suis sec.

Une idée?

Paulin.

[Patrick]

[paulin]

Salut Pat,
Si j'ai modifié xorg.config ? Ben... heu.... A mes premières tentatives d'y a quelques semaines oui, mais là j'ai cherché des nv ou des vga, mais j'ai rien trouvé. c'est p'être du à ma recompile du kernel.

Voici mon xorg.conf

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "speedo"
# This loads the GLX module
Load "glx"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option "AutoRepeat" "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbLayout" "fr"
#
EndSection

Section "InputDevice"

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
# The mouse device. The device is normally set to /dev/mouse,
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 31.5 - 50.0
VertRefresh 40.0 - 90.0
EndSection

Section "Device"

#VideoRam 4096
# Insert Clocks lines here if appropriate
Identifier "VESA Framebuffer"
Driver "vesa"
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
# DefaultDepth 16
# DefaultDepth 32
# "1024x768" is also a conservative usable default resolution. If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Et en prime voici le modules.conf

alias sound-slot-0 snd-via82xx
alias char-major-195* nvidia

Paulin,
Cumulateur.

[Patrick]

[paulin]

Salut Patrick,

Ca marche !

vesa remplacé par nvidia.

Merci,

Paulin.

[Patrick]

Chalut !!

Ha ! ! !
Tu vois qu'on va l'avoir à l'usure cette distro ! ! !

Si j'ai pas d'autres posts d'ici ce soir ( quoique . . . ), je te souhaite
un bon réveillon ainsi qu'à ta petite famille

Amitiés

Patrick

[paulin]

Merci,
Bon réveillon à tous !

Paulin.